WASHING DRYING LINE FOR HDPE Ref.GE407

WASHING DRYING LINE FOR HDPE

• Reground from PPL BIG BAGS in 60×60 mm flakes, freed from any stones and metals
• Approximate throughput rate 1.500 kg/h depending on thickness and contamination degree.
• Overall contamination should not exceed 15% in weight
• All stainless sell used in the line is Aisi304.
• Electricity : 400V 50 Hz 3 Phase
• Including:
• FEEDING/DOSING UNIT with feeding augers to the washer, made in stainless steel
• WASHING MACHINE, made in stainless steel, with paddles, rotating at high speed to remove solid contamination through a 3 mm diam. perforated cage before entering the sink-float separation bath.
• SINK-FLOAT TANK + draining extraction auger, made in stainless steel. It receives the pre-washed PPL flakes which will float, being separated from heavier contamination, moved by a stirring device. Material is conveyed through a draining auger
• From top, while waste, sank contamination is extracted from bottom. Catwalk, railing and ladder.
• CENTRIFUGE+ BLOWER + CYCLON: material is partially dried through a spinning centrifuge, made in stainless steel, with interchangeable stainless steel paddles, mounted on water cooled bearings, automatically grease-lubricated. The decagonal
• Cage is externally rinsed by water spraying, automatically driven.Complete with fan, blower and cyclon
• CONTROL PANEL with Siemens PLC, SIMATIC touch screen, Siemens components.
• Electric Power: installed about 130 kw – used in work about 90 kw.
• Compressed air (8 bar) 100 lt/h (free air)
• Water recirculation approx. 5/10 m3/h
• Water consume approx 0,5/1 m3/h
• Water must always be kept clean and all circulating water must be fresh or coming from a water treatment plant having having the following values: Hardness 8-10°F pH 7-8
• Residual moisture after centrifuge : 10-13%
• This offer does not include a water treatment system.
• User’s manual, drawings, CE compliance